|Power Supplye:||220V, 50Hz||Application:||Textile Fabric Garment|
|Sample Holder:||45°||Warranty:||1 Year|
|Standard:||ASTM E 162 & ASTM D 3675||Working Temperature:||815℃|
305mm Surface Flammability Tester,
457mm Surface Flammability Tester,
100kW/M2 Flame Test Apparatus
Radiant Panel Flame Spread Test Apparatus Surface Flammability Tester
This Radiant Panel Flame Spread Test Apparatus is used to measure and describe the
response of materials, products, or assemblies to heat and flame under controlled conditions,
but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of
materials, products, or assemblies under actual fire conditions.
This machine provides a laboratory procedure for measuring and comparing surface flammability
of materials when exposed to a prescribed level of radiant heat energy.
Surface flammability is measured by using a vertically mounted propane gas and air fueled
radiant heat energy source and a 6 inch by 18 inch test specimen.
The Radiant Panel Flame Spread Apparatus measures the surface flammability of building
products (ASTM E162) and cellular plastics (ASTM D3675) by using a gas-fired radiant heat
panel. The test result is an index that is determined from the flame spread and heat evolution
factors. This index is required in various specifications especially for the mass transit industry
(buses and trains).
ASTM E 162: Standard test method for surface flammability of materials using a radiant heat
ASTM D 3675:Standard Test Method for Surface Flammability of Flexible Cellular Materials
Using A Radiant Heat Energy Source
1. The Reflector made from cast iron frame, with surface size 305X457mm,working temperature
2. The filter equipped with a fan to supply air to the reflector
3. Stainless steel pilot burner assembly, make it fire automatically
4. Calibration burner has 1.8mm hole on 16 different angles, and along with the center line.
5. To control the surface temperature of the reflector panel, need to set black panel body
temperature in the range of 180℃to 230℃, accuracy of ±5℃,
6. Use heat-flow meter(foil disk) to measure the heat radiation condition of radiant panel
7. DAQ(Data Acquisition) system could make test automatically control and measure.
Control box size
AC 220V, 50/60Hz, 15A
Min 15 ㎥/min
1. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2. Why should you buy from us not from other suppliers?
We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.
3. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES；
Accepted Payment Currency:USD,EUR,JPY,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card,PayPal,Western Union,Cash,Escrow;
Contact Person: Jane