|Product Name:||Needle Flame Tester||Material:||Stainless Steel|
|Test Chamber:||0.5 Cubic Meters||Flame Temperature Measurement:||100 ℃ ± 2 ℃ To 700 ℃ ± 3 ℃|
|Burner Needle Diameter:||Diameter 0.5 ± 0.1mm||Standard:||IEC 60695|
IEC 60695 Flammability Testing Equipment,
Automatic Flammability Testing Equipment,
800VA Needle Flame Test Equipment
Needle Flame Tester Testing Machine Wire And Cable Burning Resistance
Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts.
The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is assessed using simulation techniques. For small parts (or components) Glow-wire test or horizontal-vertical combustion test method is not suitable, can be cited needle flame test method. If the test sample is ignited during the glow-wire test, the resulting combustion hazard is subject to a needle-flame test. Needle flame tester for electrical and electronic products, household appliances parts, components and components, such as:
wiring board, centrifugal switch, rice cooker socket ... ....
Function and technical index:
The flame of the test is made of bottled butane gas.
The needle of the burner needle has the diameter Φ0.5 ± 0.1mm, the outside diameter is no more than Ø0.9mm and the length is more than 35mm. Adjustable 12 ± 1mm, according to the standard requirements transferred to a height measuring instruments. Flame temperature measurement from 100 ℃ ± 2 ℃ to 700 ℃ ± 3 ℃ time in 23.5s ± 1.0s within. (Tb)
inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ,
length ≥ 35mm, stainless steel
|Burner angle||0°, 20°, 45° (adjust flame height)|
Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand
Temperature -40°C~ 1100°C
|Burning time||0-999.9 s ± 0.1 s adjustable (usually selected for 30s)|
|Hold Burning time||0-999.9 s ± 0.1 s, automatic recording, manual time-out|
|Flame Height||12mm ± 1mm (with height measurement instruments)|
|Flame Gas||butane gas/Butane gas, min. 95% purity (can use bottled lighter gases)|
|Temperature Test Range||0~1000°C|
|Flame Temperature Requirement||from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds|
|Standard Copper Block||4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP|
|Test process||Automatic control, independent convulsions|
|Consult standard||GB/T5169.10-2006 , IEC60695-11-5:2000,UL746A|
|Power Supply||800VA ,220V, 48-60Hz|
Combustion tank and the main mechanical part of the stainless steel, manufacturing stress, resistance to smoke, gas corrosion.
The flame can be used in the range of 0 to 99 minutes and 99 seconds, automatic control, record the burning duration.
Key components using imported parts, digital time, fixture three-dimensional adjustable, control system automation, independent ventilation, observation and easy to use, stable and reliable.
Contact Person: Emily