|Product Name:||Vacuum Drying Oven||Internal Dimension:||(W×H×D)40×36×35 Cm|
|Temperature Uniformity:||±2.00°C||Temp. Heating Time:||0℃ ~ +100℃within 30min; -20℃ ~ +150℃within 45min|
|Overall Dimensions:||Can Be Customized||Cooling Method:||Water|
|Simulated Load Ic:||5.0kg||Ambient Temperature:||0°~30°|
|Preheating Time:||30MIN||Power(K.W):||AC380V 50HZ 18KW|
Stainless Steel Plate Environmental Test Chamber PID / SSR Control Thermal Shock Tester
PID and SSR Control Method Thermal Shock Testing Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment , that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Application objects, including metal, plastic, rubber, electronics ... and other materials can be used as a basis to improve their products or reference.
1. PID and SSR Control Method Thermal Shock Testing Chamber
2. Micro processor, multi function control. To control and monitor the compressor, the solenoid valve and the heater .
3. When faults occur, the auto detection and protection function will activate and will automatically cut off the power, the LCD screen will shows the fault status.
4. Appointment function , the equipment can be activate and start for operation through setting (Year, month, date, hour and minute)
5. Accumulation operation time provide a record for management and maintanence.
6. Setting of the backlite of the LCD can extend the useful life of the LCD.
7. Can choose one paragraph of control or the multi-screen process to increase the convenience of its operation.
8. Curve drawing function: After setting up the operation parameters or during the running mode, you can call out the screen to understand the running situations and conditions.
9. Program execution can be suspended (HOLD), Jump paragraph (ADV) and other procedures involved in setting.
10. Recovery time and test time WAIT function.
11. Power breakdown recovery function, can select BREAK, COLD, or HOT.
|Model||PID and SSR Control Method Thermal Shock Testing Chamber|
|Internal Dimension:||(W×H×D)40×36×35 cm|
|Structure:||Two chambers design(the hot chamber or the cold chamber)|
|Damper device:||Forced air drived damper|
|Interior material:||SUS# Stainless steel plate|
|Exterior material:||SUS# Stainless steel plate|
|Basket material:||SUS# Stainless steel plate|
|Refrigeration:||Cascade refrigeration system|
|Preheating temperature:||above freezing 60.00°C~above freezing200.00°C|
|Precooling temperature:||subzero 10.00°~ subzero 70.00°C|
|H.T. Shocking:||above freezing 60.00°C~above freezing 150.00°C|
|L.T. Shocking:||subzero 10.00°C~subzero 65.00°C|
|Simulated load ic||5.0kg|
|HT IN-Zone||subzero 65.00°C~above freezing 150.00°C/5min|
|LT IN-Zone||above freezing 150.00°C subzero 65.00°C|
|Setting range:||Temperature:subzero 100.00°C~above freezing 200.00°C/TIME:OHIM~999H/CYCLE:0 ~9999|
|Output mode:||PID and SSR(control method)|
|Power(K.W)||AC380V 50HZ 18KW|
DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District (Dongguan City, Guangdong Province,China),a famous historical town with prosperous industry and convenient transportation.
We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.
Decades of research and development strengthen the leading edge of YUYANG in this field, and established as an crucial role in R&D on high quality and high-cost performance of testing equipment. YUYANG's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, lithium battery, LED, photoelectricity, mobile, plastic and rubber, display, telecommunication, chemical industry, aerospace, building material and product, wire and cable, toys, furniture, textile and fabrix, etc. All YUYANG testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
DONGGUAN YUYANG INSTRUMENT CO.,LTD looks forward to cooperating with customer all over the world.
If you are interested in any of our products or would like to discuss a custom order. Please feel free to contact us. We are looking forward to forming succesful business with new clients around the world in the near future.
Contact Person: Queenie
Product Name: Environmental Test Chamber
Model: YY1014-80L/ YY1014-150L /YY1014-225L /YY1014-408L /YY1014-800L /YY1014-1000L
Inner Size W×H×D(cm): 40×50×40, 50×60×50, 60×85×80, 60×85×80 100×100×80 100×100×100
Outside Size W×H×D(cm): 92×140×90, 105×150×110, 105×165×120, 115×175×140, 160×190×160, 160x190x180